Suction Air Drilling Machine Portable
11 h : 0 min : 47 seconds
2-3 days delivery
The Portable Air Drilling Machine can quickly suction on any flat rough surface without any other auxiliary tools and drilling it. The Drill provides Max. Free Speed 1,500 rpm.
Portable Air Drill, Pneumatic Drill (Vacuum Suction Base)
Air Drill with Drill Stand, Pneumatic Drill with Drill Bracket
The D161ADM Air Drilling Machine can replace the Magnetic Drilling Machine and be used on various coarse and flat surface. The Magnetic Drilling Machine can be only used on iron material.
The Drilling Depth can be showed or set when you are drilling.
With no dust jobs (wet drilling), high efficiency, save time and precision.
- * Used with Air Compressor, no need to use vacuum pump.
- Max. Free Speed : 1,500 rpm
- Drill Chuck Size: 5/8”(16 mm)
- Max. Drill Bit Length: 125 mm
- Suction Cup Size : 86 mm x 3 pcs
- Drilling Bore Size : 43 mm
- Weight : 9.53 kgs
- Size : 46 x 24 x 28 cm (LxWxH)
- Working Pressure : 6.3 kgf/cm2 (90 psi)
- Air Inlet : 1/4"
- Hose Size : 6.5 mm
- Air Cons. : 0.56 m3/min (20 SCFM)
- Lift Capacity : 60 kgs
- Sound Pressure : 92 dBA
- The conventional suction can only apply to smooth surfaces, but the novel vacuum suction fixing base can apply to wet and coarse flat surfaces such as cement wall, lumber plywood, stone back, etc.
- The vacuum suction firms the machine onto the surface of the wall firmly and directly free of extra fixing devices.( It is necessary to confirm that the vacuum suction works indeed onto the surface prior to releasing the machine. )
- The workpiece and the machine are attached firmly and closely by the vacuum suction, so no moving workpiece bothers the worker.
- The air source shared by the vacuum suction and the machine demands one vent pipe only. Don't need two air sources.
- The machine has stepless speed regulation and the max. free speed is 1,500 rpm.
- The water yield is valve-controllable and the water comes from either the drill chuck or the bores.
- The Drilling Depth Control design can show or setup the depth that you are drilling.
- The ON/OFF switch controls over rapid and slow feed / escape.
- Without the additional vacuum pump (vacuum generator).
- The D161ADM Portable Drilling Machine (Vacuum Suction Type) can replace the Portable Magnetic Drilling Machine and is used on various coarse and flat surface. The Portable Magnetic Drilling Machine can be only used on iron material.
- With no dust jobs (wet drilling), high efficiency, smooth wall of hole and precision.
- Lightweight (less than 10 kgs).
When you register for DTC HUB
- Instant access to your bespoke favourite product list
- Speedy ordering via your credit facility
- Review spending & previous orders
- 1 click to managing your account
- Innovative “Quick order” feature
- Live online catalogue
- Daily offers