• The right product for any application
• Fast, clean cutting
• High-performance quality for any popular machine

• Converts your Dremel tool into a plunge router to rout circles, signs and inlay work, decorative edges and to rout parallel to an edge.
• Plunge-lock in handle - simply turn handle to lock/unlock.
• Two depth stops for quick, consistent adjustment of depth.

• Designed to use accessories in right angle for hard to reach places.
• Ball bearings and bevel gears provide smooth and cool operation and guarantee longer lifetime.
• Coupling system allows to place the attachment in 12 different directions on your Dremel tool.

• 10.8V

• 25 peices
• Range of sizes 1.0 - 13.0 mm in 0.5 mm steps

• 6 peices
• 12, 14, 16, 18, 20, 22 mm
• Comes conveniently packed in case

• Thin high-output cutting disc especially for stainless, thin-walled materials such as pipes, metal sheets, profiles, wires
• Hardness: hard
• Very high cutting output with good tool life by using special corundums

• Dry or wet use
• 44/60 Grit
• 5mm Wrapover

• Super-thin cutting discs are the ideal answer for cutting sections of aluminium.
• Longer lasting & versatile
• Outstanding cutting performance 

• Ground carbide teeth are designed for cutting highly abrasive mineral-based materials
• Very large tooth pitch and side-set teeth provide rapid cutting results, thick gauge material provides high stability
• Carbide Technology for cuts in even the toughest abrasive materials such as aerated concrete blocks

Dremel EZ Speedclick Mandrel

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.

The tile cutting bit 562 cuts ceramic wall tile, cement board and plaster. (Not for use on floor tile)

Dremel EZ SpeedClic Cutting Discs 38mm (12)

• Maximum comfort with minimum effort due to the ergonomic design
• Comfortable 2 component handle giving an excellent grip
• Carbide blades for easy removal of paint, glue, varnish and rust off various surfaces

• Product Air Inlet (in) 1/4 bsp
• Product Avg. Air Con (CFM) 4
• Product Noise (dBA) 91

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

Tackle all your indoor or outdoor DIY projects with just one Multi-Tool. This cordless power tool runs on a 10.8V lithium-ion battery and is as powerful as corded Multi-Tools. It charges in just 1 hour for fast and easy project completion. Save time on switching the interchangeable accessories with the integrated wrench in the EZ Twist nose cap. Go from cutting and grinding to sanding and polishing in no time. The motor brake stops the accessory from spinning immediately after switching off the tool, which allows you to lay it down right after use and get to the next step of your project. Go from coarse to fine to a perfect detailed finish.

A unique accessory designed for cutting hard materials. For example concrete, stone, porcelain, ceramic and hard epoxies. The diamond wheel produces a fine cut, is extremely durable, does not break and retains it shape. Quick, Easy, Keyless.

• Ideal attachment for precise, detailed work or hard to reach places.
• Comfort grip handpiece allows fingertip control to cut, grind, sand, polish and more.
• Integrated shaft lock button for quick and easy accessory changes.

UT Angled Air Drill 3/8" c/w Keyless Chuck (8806)

• Maximum air pressure 6.4 Bar 
• Product Chuck Type Chuck & Key
• Product Chuck Thread 3/8 x 24

• Battery voltage:18 V
• Maximum torque - soft: 24 Nm
• Maximum torque, hard: 48 Nm

• Voltage: 18 v
• Max. in wood: 36 mm
• Max. in masonry: 13 mm

• Voltage: 18 v
• Standard Bolt: M5-M16
• High Tensile Bolt: M5-M14

• No Load Speed: 0 - 3000 rpm
• Input wattage: 450 w
• Vibration: Drilling: 3.5 m/sec²

• Voltage: 18 v
• Max. in wood: 25 mm
• Max. in steel: 10 mm

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

• 6 peice set
• 6.3 - 20.5 mm size range

• Size range from 10-30 mm
• 152 mm long

• Range in sizes 20-50 mm

• 19 peices
• Range of sizes 1.0-10 mm in 0.5 mm steps

• 25 peices
• Range of sizes 1.0-13.0 mm in 0.5 mm steps

• 25 peices
• Range of sizes 1/16" - 1/2" in 1/64" steps

• Available in singles and bulk (25 peices)
• Range of sizes - P21-P23

• Easy to carry case
• 60 peices

• A4/316 Stainless Steel
• Easy to carry case
• 10 inserts

• A4/316 Stainless Steel
• Range of sizes available

• General purpose tap wrenches for tapping and reaming.
• Solid jaw design and heavy knurled cap.
• Supplied in pouch.

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

• 6 peices
• 2 x 14 mm, 2 x 18 mm, 2x22 mm
• Comes conveniently packed in case

• Available in both standard and long lengths

• 900w
• Robust Case
• Variable Speed

• 1150w
• Robust Case
• Variable Speed

• Tungsten Carbide tipped blades
• High Durability
• Suitable for long periods of use

• High Quality
• Coarse Teeth
• Made with powdered tungsten carbide

• 50 mm teeth length
• 1.1mm tooth pitch
• Teeth made from tungsten carbide

• Max in steel: 6 mm
• Max in wood: 65 mm
• Strokes per Minute: 500-3100 spm

• Voltage: 18 v
• Max. in steel: 10 mm
• Max. in wood: 135 mm

• Voltage: 18 v
• Max in steel: 10 mm
• Max in wood: 135 mm

• Max in wood: 90 mm
• Max cut in pipe: 90 - 30 mm
• Strokes per Minute: 0-2800 spm

• Voltage: 18 v
• Capacity in Wood: 255 mm
• Capacity in Mild Steel Pipe: 130 mm

• Progressively increasing tooth pitch (1.8-3.2 mm) enables rapid cuts in materials with a wide range of densities
• BIM blade engineered for cutting regular-strength steel pipes and profiles
• Special tooth design for cutting steel materials (1-8 mm). Standard blade length for a 100 mm cutting capacity

• Milled, side-set teeth for cuts without special requirements
• BIM blade is optimised to cut soft nails, mild steel materials and non-ferrous metal components embedded in wood
• Standard length (150 mm) enables a cutting capacity of up to 100 mm

• Carbide tooth strip provides excellent rigidity and stability for maximum lifetime
• Precision-ground teeth are optimised for cutting stainless steel
• Tooth strip is welded to highly elastic carbon steel body with Carbide Technology for cutting very tough materials

• Depth of Cut @ 90°: 66 mm
• Blade Diameter: 190 mm
• Depth of Cut @ 45º: 46 mm

• Shiplapping: 9.0 mm
• Cuts per minute: 34000 cpm
• Noise sound pressure: 89 dB(A)

• Voltage: 18 v
• No Load Speed: 14000 rpm
• Vibration K factor: 1.5 m/sec²

• Voltage: 18 v
• Depth of Cut @ 90°: 57 mm
• Blade Diameter: 165 mm

• Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.
• 3" Diameter, Right Angle, .4 hp, 12,000 RPM, Rear Exhaust. Ideal for use with optional 3" diameter Diamond Cut-Off Wheels.
• Adjustable wheel guard has vacuum port (1" outside diameter) that diverts airborne dust and debris to optional vacuum source.

• Oscillation Angle: 3.2 º
• Oscillations per Minute: 6000 - 20000
• Input Wattage: 320 w

• Voltage: 18 v
• Oscillation Angle: 3.2 º
• Oscillations per Minute: 6000 - 20000

• Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction.
• High-torque motor with exactly the same power as the mains-powered version.
• Convenient accessory changes without the need for extra tooling with the QuickIN clamping system.

• Ideal for removing bonded panes and carrying out vehicle repairs.
• FEIN anti-vibration system. Up to 70% fewer vibrations as the external motor housing is completely separate. For permanently safe working.
• 450 W FEIN high-power motor with high copper content for outstanding cutting speeds and maximum work progress, suited to continuous use and overload.

• Maximum quality and stability thanks to metal gearbox head and consistent use of ball / needle bearings.
• Powerful 250 W FEIN high-power motor designed for continuous use.
• Electronic speed setting.

• Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction.
• Very powerful 350 W FEIN high-power motor for maximum cutting speeds and work progress.
• Maximum quality and stability thanks to metal gearbox head and consistent use of ball / needle bearings.

• Bimetal with corrugated universal teeth. Wide range of applications for sheet metal up to 2 mm, aluminium profiles, copper pipes, wood, plasterboard and plastics.
• Narrow, with waist for optimum cutting speed and good swarf removal.