×

Trade Customer? Save Up To 30% Off Standard Prices- Unlock Trade Pricing

Jacking & Lifting

Jacking & Lifting

Set Descending Direction
  1. Jacking Beam

    • Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.
    • Supplied with two pairs of aluminium support blocks.
    • Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.
    From £659.00
  2. Wheel Chocks

    Two durable and high quality rubber wheel chocks to ensure that vehicle will not move when being jacked or parked on an incline. Suitable for cars, light vans and aircraft not exceeding the specified weight:

    From £15.96
  3. Scissor Lift

    The LDS3000 is an electro hydraulic operation in-ground scissor lift with a lifting capacity of 3000kg, a lifting and lowering time of 50 seconds. It has low voltage controls (24v), hydraulic volumetric synchronism, platform levelling controls and hand lowering device in case of power failure.

    From £4,975.00
  4. 4-Post Vehicle Lift

    • Freestanding or bolt-down design
    • Runways feature non-skid surface
    • Single hydraulic cylinder under ramp
    From £3,750.00
  5. 2-Post Vehicle Lift

    • Adjustable width design
    • Dual hydraulic lifting cylinders
    • Single-piece columns
    • Single point safety release
    • Drop-end arms
    • Triple-telescoping arms
    • Electric / hydraulic system
    • UHMW polyethylene bearings
    • Dual 3”- spaced safety locks
    • Automatic arm restraints
    • 8-piece truck and van adapter
    • Adjustable wide or narrow drive-thruconfigurations
    • Versatile drop in contact pads
    • Durable powder coat finish
    • Open top design
    • Large steel base plates
    • Heavy-duty 3/8” equalizer cables

    From £3,195.00
  6. Transmission Jack Heavy Duty

        Suitable for other lifting operations such as mounting of springs, fuel tanks, exhaust pipe etc.

    From £351.92
  7. Bottle Jack Heavy Duty

    Top quality range of heavy duty bottle jacks for commercial applications

    From £143.10
  8. Bottle Jack

    • Cast base with threaded components for easy disassembly.
    • Fully tested and fitted with overload valve to comply with the latest CE regulations.
    • Service kits readily available.
    From £23.16
  9. Air Jack

    These air hydraulic jacks for heavy vehicles are practical and easy to handle.

    From £1,160.70
  10. Transmission Jack

     Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.

    From £295.00
  11. Trolley Jack Professional

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    From £319.00
  12. Pallet Truck High Lift - 800mm Max Height

    • Heavy-duty high lift pallet truck suitable for the loading/unloading of light commercial vehicles as well as warehouse/general handling duties.
    • Features twin stabilisers for extra balance when at maximum lift and an ergonomic handle design for comfortable operation.
    £698.00
  13. Chain Blocks - 2000kg Capacity

    • Fitted with heat treated and ground, triple-spur geared shaft and pinion.
    • Also includes mechanical load brake for extra safety.
    • All chains are manufactured from hardened alloy material and load hooks feature safety latches.
    £159.98
  14. Power Hoists - 400kg Capacity Power Hoist

    • Approved to EU and UK Lifting Gear Regulations.
    • This hoist is intended for use where a suitable support facility exists.
    • Support brackets are included with the equipment.
    £189.98
  15. Drum Stand - Mobile Stillage

    • Allows safe storage of 205ltr drums in the horizontal position for quick dispensing of contents.
    • Radiused frame helps up-end drums.
    • Highly manoeuvrable on two heavy-duty rubber tyres and two castors.
    £117.39
  16. Drum Stand - Stillage

    • Allows safe storage of 205ltr drums in the horizontal position for quick dispensing of contents.
    • Radiused frame helps up-end drums.
    £91.44
  17. Heavy Duty Handling Trolley

    • Tubular steel construction with heavy-duty solid rubber tyres.
    • Simple to use, simply slip the loading lip under the barrel and rock the drum over.
    • Heavier loads may require two person operation.
    £189.00
  18. Drum Grab 350kg - 350kg

    • Lifts open or closed, loaded, steel drums with the aid of an overhead hoist.
    • Keeps drum in vertical position reducing spillage.
    • Heavy-duty steel construction.
    £62.95
  19. Axle Stand Set 2pce - pair

    • Fast & easy ratchet height adjustment
    • Heavy duty cast iron support post
    • Steel base plate with broad feet
    £22.48
  20. Wheel Chocks - 16kg pair (suitable for heavy commercial vehicles and light aircraft)

    Two durable and high quality rubber wheel chocks to ensure that vehicle will not move when being jacked or parked on an incline. Suitable for cars, light vans and aircraft not exceeding the specified weight:

    £63.96
  21. Wheel Chocks - 4kg pair (up to 4 ton)

    Two durable and high quality rubber wheel chocks to ensure that vehicle will not move when being jacked or parked on an incline. Suitable for cars, light vans and aircraft not exceeding the specified weight:

    £15.96
  22. Wheel Chocks - 5.8kg (up to 10 ton)

    Two durable and high quality rubber wheel chocks to ensure that vehicle will not move when being jacked or parked on an incline. Suitable for cars, light vans and aircraft not exceeding the specified weight:

    £23.96
  23. Mobile Lift - 2500kgs

    • Completely mobile
    • Quick and easy to use
    • Maximum vehicle weight SWL 2500kg
    £1,595.00
  24. Jacking Beam - 3 ton 1.6m reach

    • Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.
    • Supplied with two pairs of aluminium support blocks.
    • Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.
    £759.00
  25. Jacking Beam - 2 ton reach 1.6m

    • Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.
    • Supplied with two pairs of aluminium support blocks.
    • Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.
    £659.00
  26. Scissor Lift - 3.0 ton Surface Mount

    The LDS3000 is an electro hydraulic operation in-ground scissor lift with a lifting capacity of 3000kg, a lifting and lowering time of 50 seconds. It has low voltage controls (24v), hydraulic volumetric synchronism, platform levelling controls and hand lowering device in case of power failure.

    £5,675.00
  27. Scissor Lift - 3.0 ton Recessed

    The LDS3000 is an electro hydraulic operation in-ground scissor lift with a lifting capacity of 3000kg, a lifting and lowering time of 50 seconds. It has low voltage controls (24v), hydraulic volumetric synchronism, platform levelling controls and hand lowering device in case of power failure.

    £4,975.00
  28. 4-Post Vehicle Lift - 5.4 ton

    • Freestanding or bolt-down design
    • Runways feature non-skid surface
    • Single hydraulic cylinder under ramp
    • Fully enclosed lifting cables, safety locks and sheaves
    • Pneumatic push-button safety release
    • Features 1-1/4” sheave axles
    • Internal “anti-sway” slider blocks in each column
    • Features heavy-duty 3/8” aircraft cable
    • Longer ramps for low ground clearance vehicles
    • Oversized sheave diameters
    • Rugged, self-lubricating cable sheaves
    • Multi-position safety locks in columns
    • Dual-position power unit locations
    • Redundant slack-cable safety latches
    • Fully adjustable lock leveling stops
    • Drive through ramps option available
    • 36” approach ramps available

    £4,995.00
  29. 4-Post Vehicle Lift - 4.0 ton

    • Freestanding or bolt-down design
    • Runways feature non-skid surface
    • Single hydraulic cylinder under ramp
    • Fully enclosed lifting cables, safety locks and sheaves
    • Pneumatic push-button safety release
    • Features 1-1/4” sheave axles
    • Internal “anti-sway” slider blocks in each column
    • Features heavy-duty 3/8” aircraft cable
    • Longer ramps for low ground clearance vehicles
    • Oversized sheave diameters
    • Rugged, self-lubricating cable sheaves
    • Multi-position safety locks in columns
    • Dual-position power unit locations
    • Redundant slack-cable safety latches
    • Fully adjustable lock leveling stops
    • Drive through ramps option available
    • 36” approach ramps available

    £3,750.00
  30. 2-Post Vehicle Lift - 5.4 ton

    • Adjustable width design
    • Dual hydraulic lifting cylinders
    • Single-piece columns
    • Single point safety release
    • Drop-end arms
    • Triple-telescoping arms
    • Electric / hydraulic system
    • UHMW polyethylene bearings
    • Dual 3”- spaced safety locks
    • Automatic arm restraints
    • 8-piece truck and van adapter
    • Adjustable wide or narrow drive-thruconfigurations
    • Versatile drop in contact pads
    • Durable powder coat finish
    • Open top design
    • Large steel base plates
    • Heavy-duty 3/8” equalizer cables

    £4,750.00
  31. 2-Post Vehicle Lift - 4.5 ton Clearfloor

    • Adjustable width design
    • Dual hydraulic lifting cylinders
    • Single-piece columns
    • Single point safety release
    • Drop-end arms
    • Triple-telescoping arms
    • Electric / hydraulic system
    • UHMW polyethylene bearings
    • Dual 3”- spaced safety locks
    • Automatic arm restraints
    • 8-piece truck and van adapter
    • Adjustable wide or narrow drive-thruconfigurations
    • Versatile drop in contact pads
    • Durable powder coat finish
    • Open top design
    • Large steel base plates
    • Heavy-duty 3/8” equalizer cables

    £3,295.00
  32. 2-Post Vehicle Lift - 4.0 ton

    • Adjustable width design
    • Dual hydraulic lifting cylinders
    • Single-piece columns
    • Single point safety release
    • Drop-end arms
    • Triple-telescoping arms
    • Electric / hydraulic system
    • UHMW polyethylene bearings
    • Dual 3”- spaced safety locks
    • Automatic arm restraints
    • 8-piece truck and van adapter
    • Adjustable wide or narrow drive-thruconfigurations
    • Versatile drop in contact pads
    • Durable powder coat finish
    • Open top design
    • Large steel base plates
    • Heavy-duty 3/8” equalizer cables

    £3,195.00
  33. 1 ton 3 stage Transmission Jack Super Heavy Duty

    This unit is designed specifically to provide safe, rapid removal and replacement of heavy transmissions. Simple and safe to use by just one mechanic, the unit’s low minimum height (1155mm) and unusually high extended height (2100mm) increase the unit’s flexibility. Stability comes from its wide base, safely spread over four legs.

    Standard Features

    Two way tilt adaptor - The lifting adaptor can easily be adjusted into a precise position when removing most types of transmission.

    Triple extension ram with chrome piston - Provides up to 945mm of stroke.

    Manual hydraulic double acting power pack - this allows units of up to 1000kg to be removed with a smooth, safe and highly controllable application of power.

    Load test certificate – supplied with each unit.

    £2,198.00
  34. 20 ton Air Pit Jack

    Rapid, reliable and rigorously safe – this unit will tackle anything and everything up to 20 tonnes. Key operational features - such as a full 305mm lifting stroke, full lateral ram adjustment and a high-safety twin ram system - are all backed by proven hydraulics and positive mechanical safety locks.

    Standard Features

    Twin ram operation - Greater operational stability, efficiency and safety. The rams slide transversely, making precise positioning under the vehicle possible, AND they can be used independently or in tandem, allowing one or both sides of the vehicle to be lifted.

    Surface Engineered for a longer, harder working life - All key components now have their working life greatly extended through a patented surface engineering process. This range of treatments develop iron nitride surface compound layers to toughen the surface and resist rust. The nitrogen-enriched zone can improve yield and fatigue strengths by as much as three or fourfold.

    Control valves as standard - Precise lowering for optimum safety and working conditions.

    Pressure relief valve - Automatically prevents overloading.

    Positive mechanical safety lock - Greatly enhanced operator safety especially against accidental lowering.

    Air-operated pump gives easy and rapid lift

    Quietest Ever Pump - The new quieter design significantly enhances performance and reduces noise as well as further improving operational reliability.

    Load bearing supports and spring loaded rollers - A long established design for smooth, easy and safe movement along the pit.

    £2,998.00
  35. Bottle Jack Heavy Duty - 30 ton

    Top quality range of heavy duty bottle jacks for commercial applications

    £239.00
  36. Bottle Jack Heavy Duty - 15 ton

    Top quality range of heavy duty bottle jacks for commercial applications

    £143.10
  37. Bottle Jack Heavy Duty - 10 ton Low Profile

    Top quality range of heavy duty bottle jacks for commercial applications

    £249.00
  38. Bottle Jack - 15 ton

    • Cast base with threaded components for easy disassembly.
    • Fully tested and fitted with overload valve to comply with the latest CE regulations.
    • Service kits readily available.
    £47.96
  39. Bottle Jack - 10 ton

    • Cast base with threaded components for easy disassembly.
    • Fully tested and fitted with overload valve to comply with the latest CE regulations.
    • Service kits readily available.
    £33.56
  40. Bottle Jack - 5 ton

    • Cast base with threaded components for easy disassembly.
    • Fully tested and fitted with overload valve to comply with the latest CE regulations.
    • Service kits readily available.
    £23.16
  41. 12 ton Axle Stands Heavy Duty Extra High

    • Passivated with zinc-plated support columns.
    • Fitted with base plates to ensure even distribution of the load.
    • Capacity (Per Pair)12 Tonne
    £281.00
  42. 16 ton Axle Stands Heavy Duty High

     16 Tonnes High Axle Stands (Rated and Sold in Pairs):

        Passivated with zinc-plated support columns.
        Fitted with base plates to ensure even distribution of the load.

    £155.00
  43. 16 ton Axle Stands Heavy Duty

     16 Tonnes Standard Axle Stands (Rated and Sold in Pairs):

        Passivated with zinc-plated support columns.
        Fitted with base plates to ensure even distribution of the load.

    Capacity (Per Pair)    16 Tonnes
     Min. Height (mm)     370
    Max. Height (mm)     615
    Net Weight (KG)        20.0

    £112.00
  44. 12 ton Axle Stands

    • Ratchet type axle stand with cast iron support post and tough steel plate welded base.
    • Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.
  45. 6 ton Axle Stands

    • Ratchet type axle stand with cast iron support post and tough welded steel plate base.
    • Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked.
    £24.90
  46. Air Jack - 80/50/25/15 ton (180mm closed height)

    These air hydraulic jacks for heavy vehicles are practical and easy to handle.

    £1,902.70
  47. Air Jack - 60/30/18 ton (180mm closed height)

    These air hydraulic jacks for heavy vehicles are practical and easy to handle.

    £1,641.94
  48. Air Jack - 30/15 ton (217mm closed height)

    These air hydraulic jacks for heavy vehicles are practical and easy to handle.

    £1,266.70
  49. Air Jack - 30/15 ton (150mm closed height)

    These air hydraulic jacks for heavy vehicles are practical and easy to handle.

    £1,160.70
  50. 2.5 ton Commercial Engine Crane Heavy Duty

     2.5 Tonnes Commercial Duty Floor Crane:

        Commercial crane fitted with hard chromium platded piston rod and pump piston for longer life.
        Jib arm with large lifting capacity - even in 5th position.
        Pump rotates 360° for excellent operation in all working conditions.
        Wheels revolve 360° for easy manoeuvrability even with maximum load.
        Built-in safety overload valve.
        Lifting hook pivots 360°.
        Inner frame width enables use with Euro pallets.

    £2,889.00
  51. 1.0 ton Folding Engine Crane Heavy Duty

     1100Kg Foldaway Floor Crane for workshops and service vans:

        Foldable within seconds for quick and easy storage.
        Jib arm with large lifting capacity - even in 5th position.
        Hard chromium plated piston rod and pump piston for long life.
        Fitted with 2 castors and 2 fixed wheels for easy manoeuvrability even with maxiumum load.
        Built-in safety overload valve.
        Lifting hook pivots 360°

    £699.00
  52. 1.0 ton Folding Engine Crane

    • Super economy model delivered in knock-down form for reduced freight cost.
    • Fast folding model provides easy storage and transportation.
    • Heavy-duty castors.
    £189.00
  53. Transmission Jack Heavy Duty - 1.0 ton

        Suitable for other lifting operations such as mounting of springs, fuel tanks, exhaust pipe etc.

    £559.00
  54. Transmission Jack Heavy Duty - 0.6 ton

        Suitable for other lifting operations such as mounting of springs, fuel tanks, exhaust pipe etc.

    £442.00
  55. Transmission Jack Heavy Duty - 0.3 ton

        Suitable for other lifting operations such as mounting of springs, fuel tanks, exhaust pipe etc.

    £351.92
  56. Transmission Jack - 0.6 ton

     Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.

    £349.00
  57. Transmission Jack - 0.3 ton

     Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.

    £295.00
  58. 3 Ton Trolley Jack - 3 Ton HD Trolley Jack

     Single-piece hydraulic unit with heavy base design.

    £149.00
  59. Trolley Jack Professional - 10.0 ton

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £739.00
  60. Trolley Jack Professional - 6.0 ton

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £719.00
  61. Trolley Jack Professional - 5.0 ton

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £499.00
  62. Trolley Jack Professional - 4.0 ton

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £479.00
  63. Trolley Jack Professional - 3.0 ton

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £329.00
  64. Trolley Jack Professional - 2.0 ton High Lift

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £369.00
  65. Trolley Jack Professional - 1.5 ton High Lift

    • Ergonomically designed handle for operator comfort, rubber coated
    • 'Lift-and-turn' lowering system prevents unintentional lowering
    • Additional foot pedal pumping feature provides fast saddle raising to the load
    £319.00
Set Descending Direction