• Composite board fitted with 6mtr of 7-core cable and 12V N-type plug.
• Includes 2 x e-approved reflective triangles, 2 x 4 function lamp clusters (stop, tail, indicator and number plate illumination light) and fog lamp.
• Pre-drilled mounting points (905mm centres).

   

• Composite case with integral battery clip storage and carry handle.
  
• LED battery condition and charge indicators.
  
• Test cycle button gives true battery indication.
  

• Composite case with integral battery clip storage and carry handle.
  
• LED battery condition and charge indicators.
  
• Test cycle button gives true battery indication.
  

• Composite case with integral battery clip storage and carry handle.
• Twin batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents.
• Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V.

• Voltage: 12V/24V
• Peak Power: 610A
• Max vehicle start: 120Ah

• Finished in safety red
• Safety warning labels
• Lockable shut-off valve

• Quality PVC sheathed copper welding cable gives maximum power transfer yet remains flexible.
• Resistant to oil, grease and most acids.
• Insulated and oversized clamps with strong return springs help reduce the heating effect of power transfer.

• Quality PVC sheathed copper welding cable gives maximum power transfer yet remains flexible.
• Resistant to oil, grease and most acids.
• Insulated and oversized clamps with strong return springs help reduce the heating effect of power transfer.

• Quality PVC sheathed copper welding cable gives maximum power transfer yet remains flexible.
• Resistant to oil, grease and most acids.
• Insulated and oversized clamps with strong return springs help reduce the heating effect of power transfer.

• Fits across battery
• Ideal when welding, cutting and jump starting
• Protects coded radios, alarms, ECU's, fuel-tank senders and other delicate vehicle electronic systems

• Fits across battery
• Ideal when welding, cutting and jump starting
• Protects coded radios, alarms, ECU's, fuel-tank senders and other delicate vehicle electronic systems

• This Solid welded car trolley constructed with heavy gauge steel is ready to take a massive 800kg load.
• Use this trolley for vehicles where either the front or rear end wheels have been removed. The trolley will keep the vehicle mobile at all times saving loads of time and effort.
• No need to attempt to manoeuvre a vehicle around on a trolley jack!

• 3tonne Rolling load capacity rigid tow pole.
  
• Hook mechanism allows for mounting pole between vehicles where towing eyes may be mixed, i.e. not both horizontal or vertical.

• Elasticated webbing design helps prevent tow rope dragging on the ground during overrun.
  
• Ropes feature tough, heavy-duty stitched hook retaining sleeves.
  
• Exhaustively tested for compliance with HSE requirements.

• Elasticated webbing design helps prevent tow rope dragging on the ground during overrun.
  
• Ropes feature tough, heavy-duty stitched hook retaining sleeves.
  
• Exhaustively tested for compliance with HSE requirements.

• Manufactured from polyester webbing with stitched reinforcement around hooks
  
• Suitable for securing loads and tarpaulins onto flat-beds or trailers and for general load restraint.
  
• Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint.

• Manufactured from polyester webbing with stitched reinforcement around hooks
  
• Suitable for securing loads and tarpaulins onto flat-beds or trailers and for general load restraint.
  
• Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint.

• Manufactured from polyester webbing with stitched reinforcement around hooks
  
• Suitable for securing loads and tarpaulins onto flat-beds or trailers and for general load restraint.
  
• Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint.

• A must or any recovery operator.
• Ideal for the medium sized cars and vans.
• Robust design will give years of service.

• Comprehensive set of sockets for the removal of locking wheel nuts
• Sizes : 17 -26mm
• Can be used with 1/2”Dr air tools

• Comprehensive set of sockets for the removal of locking wheel nuts
• Sizes : 17 -26mm
• Can be used with 1/2”Dr air tools

• Manufactured from polyester webbing with stitched reinforcement around hooks.
  
• Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down.
  
• Features wheel chocker with 'O' ring for use with steel wheels or soft wheel chocker for use on alloy wheels.

• Manufactured from polyester webbing with stitched reinforcement around hooks.
  
• Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down.
  
• Features wheel chocker with 'O' ring for use with steel wheels or soft wheel chocker for use on alloy wheels.

Ideally suited for mixed fleets of 12V and 24V vehicles. Due to the unique switch arrangement both batteries are utilised for all starts thus prolonging overall battery life, whilst ensuring maximum power delivery every time.

• Tensioning of the tie down relies on the operator using their body weight
• Features wheel chocker with 'O' ring for use with steel wheels
• Features a double-locking, short narrow handle ratchet which ensures there is no risk of accidental tension loss

• Composite case with integral battery clip storage and carry handle.
  
• LED battery condition and charge indicators.
  
• Test cycle button gives true battery indication.
  

• Quality PVC sheathed copper welding cable gives maximum power transfer yet remains flexible.
• Resistant to oil, grease and most acids.
• Insulated and oversized clamps with strong return springs help reduce the heating effect of power transfer.

• Fits across battery
• Ideal when welding, cutting and jump starting
• Protects coded radios, alarms, ECU's, fuel-tank senders and other delicate vehicle electronic systems

• Manufactured from polyester webbing with stitched reinforcement around hooks
  
• Suitable for securing loads and tarpaulins onto flat-beds or trailers and for general load restraint.
  
• Ratchet mechanically tensions the webbing using a simple drum and ratchet mechanism providing superior load restraint.

• Comprehensive set of sockets for the removal of locking wheel nuts
• Sizes : 17 -26mm
• Can be used with 1/2”Dr air tools

• Manufactured from polyester webbing with stitched reinforcement around hooks.
  
• Suitable for securing cars on transporters using wheel strap, which slides on to the main tie down.
  
• Features wheel chocker with 'O' ring for use with steel wheels or soft wheel chocker for use on alloy wheels.