×

Trade Customer? Save Up To 30% Off Standard Prices- Unlock Trade Pricing

Vehicle Service & Repair

Vehicle Service & Repair

54 Items results

per page
Set Descending Direction
  1. Metal Drainpans - 12Ltr

    For further information on this product click the 'View Details' button to the right.

    £19.95
  2. Pneumatic Brake + Clutch Bleeder

    • Simple, one-man operation using standard workshop air supply (90-120psi).

    From £34.61
  3. Tarpaulins

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    From £7.45
  4. Metal Drainpans

    For further information on this product click the 'View Details' button to the right.

    From £19.95
  5. Battery Charger

    • Compact electronic battery charger with pressed steel casing and carry handle.

    From £49.95
  6. Auto Maintenance Battery Charger

    • Fully automatic 9-cycle switch mode charger and maintainer designed for charging a variety of batteries.

    From £44.95
  7. Battery Charger Heavy Duty

    • Supplied in steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures.

    From £81.00
  8. Chassis Straightener

    • One of the biggest selling chassis repair systems in the UK with proven performance over the last 35 years.
    • Variable position upright allows six pre-set angles of pull plus a seventh upright position.
    • Supplied as standard with SuperSnap® manual hydraulic pump and ram
    £798.00
  9. Pressure Brake Bleeder 12V

    • Fast; full fluid change can be completed by a single operator in around 15 minutes,
    • Efficient; pressure bleeding is the only method approved by brake fluid manufacturers
    • Versatile; fluid can be changed as well as bled
    £350.00
  10. Mobile Air Operated Pressure Brake Bleeder - Air Operated Pressure Brake Bleeder

    • Mobile air operated pressure brake bleeder
    • Portable - can be disconnected from air supply
    • Stores pressure inside tank
    £398.00
  11. Creeper Board

    • Heavy-duty steel framework with powder coat paint finish.
    • Easy rolling Ø60mm composite castor with ball bearing swivels.
    • Features vinyl covered back and head rest.
    £39.95
  12. Creeper Board Composite

    • One-piece, moulded, high impact, polymer creeper with two integral tool trays and padded headrest.
    • Low profile for greater under vehicle clearance.
    • Features six Ø75mm castors for easy manoeuvrability.
    £44.95
  13. Creeper Board/Seat

    • Heavy-duty steel framework with powder coat paint finish.
    • Fitted with six Ø60mm smooth rolling castors on ball bearing swivels.
    • Ingenious split back design permits dual applications either as flat creeper or folded up as mechanic’s seat.
    £52.95
  14. Battery Charger 8Amp 12/24V 230V - 8Amp 12/24V 230V

    • Supplied in steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures.
    • A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly.
    • Rocker switches control variable output to the battery to maintain peak condition.
    £74.95
  15. Battery Charger 11Amp 12/24V 230V - 11Amp 12/24V 230V

    • Supplied in steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures.
    • A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly.
    • Rocker switches control variable output to the battery to maintain peak condition.
    £69.95
  16. Starter/Charger 120/20Amp 12/24V 230V - 120/20Amp 12/24V 230V

    • Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries.
    • Model features dual power output, easy to read ammeter and illuminated power switch.
    • Circuitry is protected by a panel mounted fuse.
    £124.95
  17. 4-Wheel Laser Wheel Alignment System - 4-Wheel Laser Wheel Aligner

    • Fast, simple and accurate alignment of both front and rear wheels.
    • Optimises vehicle performance and set up after installation or modification of steering or suspension components.
    • Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job.
    £1,495.00
  18. Laser Wheel Alignment Gauge

    • Updated version of optical system uses low radiation laser beam to indicate toe-in or toe-out.
    • Single leg configuration and reversible contact probes allow on-ramp use.
    • Works on practically all cars and light commercials with rim diameters from 200 to 600mm.
    £479.95
  19. Air-Con Recharge Machine Fully automatic

    • Certification according to SAE J-2788
    • Fully automatic srvice procedure or manual selection of individual service steps
    • Indication of necessary unit maintenance
    £3,825.95
  20. Headlamp Beam Setter

    • Suitable for pre-MOT inspection in garages and bodyshops.
    • Utilises same optical box and aiming screen as fitted to our MOT approved headlamp beam setter.
    • Fixed aiming screen.
    £598.00
  21. Exhaust Fume Extractor

    • Suitable for both large and small garages and workshops.
    • Excellent as a back-up machine for garages with purpose-built fume extraction units.
    • Complies with the latest EMC regulations and is powerful yet quiet.
    £1,295.00
  22. Multimeter 19 function

    • High quality general purpose multimeter with a large (46 x 25mm), clear and easy-to-read LCD display.
    • Supplied with test leads.
    • Measures:
      » DC Current
      » Resistance
      » Audible Continuity
      » Diode/Transistor Verification Mode
    £17.93
  23. Multimeter 20 function Professional

    • Heavy-duty general purpose multimeter with clear and easy-to-read LCD display.
    • Features data hold function, temperature probe and diode test facility.
    • Housed in rugged rubber boot with integral stand.
    £21.30
  24. Digital Battery/Alternator Tester & Printer 6/12V

    • Professional diagnosis of battery and alternator faults with the added facility to print the results.
    • Test battery condition with as little as 1V of residual charge.
    • No heat, no sparks and no misdiagnosis.
    £289.00
  25. Cooling System & Cap Testing Kit

    • Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank.
    • Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box.
    • Also suitable for motorcycles, off-road and marine applications.
    £183.96
  26. Petrol Engine Compression Test Kit 8pc

    • Ø57mm Gauge fitted with heavy rubber bumper, 150mm hose and M14/M18 fitting.
    • Scale reads from 0-20bar(0-290psi).
    • Suitable for most petrol engined cars and light commercials.
    £63.96
  27. Diesel Engine Compression Test Kit 11pc

    • Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector.
    • Suitable for testing cars and light commercial vehicles with direct or indirect injection.
    • Pressure relief valve allows repeated on-vehicle tests.
    £191.96
  28. Air Brake Test Kit

    • 3 x 300PSI / 20Bar, 4" industrial gauges.
    • 1% accurate gauges with divisions of 0.2 Bar (see picture).
    • Current calibration certificate provided.
    £479.00
  29. Emergency Roadside Air Gauge

    • 300PSI / 20Bar, 4" industrial gauges
    • 5 metre yellow PVC hose rated up to 600 PSI.
    • M16 x 1.5 adaptor fitted to the hose end.
    £149.00
  30. Air Suspension Load Simulator

    • Simulates full load suspension pressures.
    • Works in conjunction with AIR BRAKE TEST CASE
    • 0-10 Bar 6" gauge
    £329.00
  31. Hydraulic Brake Test Kit

    • 2x4000 PSI / 275Bar, 4" industrial gauges
    • 2x4 metre hydraulic hoses rated up to 10,000 PSI
    • Adaptors 1xM12, 1xM10, 1xM8, 1xM6
    £398.00
  32. Standard Oil Pressure Test Kit

    • 140 PSI / 10Bar, 4" industrial gauges
    • 1 metre hose rated up to 600 PSI
    • Adaptors: 1/2, 3/8, 1/4, 1/8 NPT, M10, M12, M14
    £149.00
  33. Commercial Oil Pressure Test Kit

    • 140 PSI / 10Bar, 4" industrial gauges
    • 1 metre hose rated up to 600 PSI
    • Adaptors: 1/2, 3/8, 1/4, 1/8 NPT, M10, M12, M14
    £279.00
  34. Fuel Pressure & Turbo Test Kit

    • 1x30 PSI / 2Bar, 4" industrial gauges
    • 2x5 metre hoses rated up to 600 PSI
    • 1 x -1 to +2 Bar 4" industrial gauges
    £398.00
  35. Oil Gun Rigid

    Oil control gun with 110° rigid end and manual tip. Oil control guns, manufactured in aluminium, with ergonomic grip and trigger to reduce operator hand fatigue. NBR valve with progressive action, for comfortable operation when dispensing products, even with high ratio (10:1) oil pumps. All guns include a ball bearing inlet swivel with large capacity screen filter. Maximum working pressure: 105 bar (1,500 psi). Maximum delivery: 25 l/min (6.6 US gpm). Fluid inlet thread: 1/2" NPSM (F).

    £65.39
  36. Oil Gun Flexi

    Oil control gun with 90° flexi and semi automatic nozzle. Oil control guns, manufactured in aluminium, with ergonomic grip and trigger to reduce operator hand fatigue. NBR valve with progressive action, for comfortable operation when dispensing products, even with high ratio (10:1) oil pumps. All guns include a ball bearing inlet swivel with large capacity screen filter. Maximum working pressure: 105 bar (1,500 psi). Maximum delivery: 25 l/min (6.6 US gpm). Fluid inlet thread: 1/2" NPSM (F).

    £65.39
  37. Oil Gun Digital - Digital Oil Gun

    Oval gear meter with electronic digital LCD display 366 750 coupled to a durable but lightweight oil control gun that incorporates a rugged ball bearing swivel with inlet screen filter. Meter is supplied with a protective rubber shroud. Meters are factory calibrated. Also they, can easily be re-calibrated in the field for increased accuracy. Meter can measure in litres , quarts, pints and US gallons. Maximum working pressure: 105 bar (1,500 psi). Oil flow range: 0.5 to 25 l/min. (15 to 6.6 US gpm). Fluid inlet thread: 1/2" BSP (F).

    £220.50
  38. 12V Inverter - 1000W - 1000w

    • Allows 12V batteries to power 230V AC mains appliances
    • Overload, short circuit & low battery protection with audible alarms
    • Includes battery terminal connectors
    £99.99
  39. Battery Charger - 6/12V 10 Amp

    • Compact electronic battery charger with pressed steel casing and carry handle.

    £49.95
  40. Battery Charger - 12/24V 18 Amp

    • Compact electronic battery charger with pressed steel casing and carry handle.

    £59.95
  41. Battery Charger Heavy Duty - 12/24V 14 Amp

    • Supplied in steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures.

    £81.00
  42. Battery Charger Heavy Duty - 12/24V 28 Amp

    • Supplied in steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures.

    £99.95
  43. Auto Maintenance Battery Charger - 12V 4 Amp

    • Fully automatic 9-cycle switch mode charger and maintainer designed for charging a variety of batteries.

    £44.95
  44. Auto Maintenance Battery Charger - 6/12V 4 Amp

    • Fully automatic 9-cycle switch mode charger and maintainer designed for charging a variety of batteries.

    £63.95
  45. Pneumatic Brake + Clutch Bleeder - 0.75Ltr

    • Simple, one-man operation using standard workshop air supply (90-120psi).

    £34.61
  46. Pneumatic Brake + Clutch Bleeder - 5Ltr

    • Simple, one-man operation using standard workshop air supply (90-120psi).

    £95.96
  47. Tarpaulins - 1.83 x 2.44m

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    £7.45
  48. Tarpaulins - 3.05 x 3.66m

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    £16.45
  49. Tarpaulins - 3.66 x 4.88m

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    £25.95
  50. Tarpaulins - 5.49 x 7.2m

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    £53.95
  51. Tarpaulins - 6.10 x 12.11m

    • Manufactured from 130g/m² polyethylene with heavy, 30 micron laminate.

    £99.95
  52. Metal Drainpans - 16Ltr

    For further information on this product click the 'View Details' button to the right.

    £21.95
  53. Metal Drainpans - 20Ltr

    For further information on this product click the 'View Details' button to the right.

    £23.95
  54. Leak Detection Spray

    Manufactured to British & European specification BS EN 14291:2004. Meets the standard required for MOT Testing.

54 Items results

per page
Set Descending Direction