VAT

Air Powered Tank Mixer

£1,898.00 Excl. VAT

  • Powerful and dependable, pneumatically-driven unit for use in vertical 200L drums of laminating resin.
  • Variable speed airmoter that can be run at full speed or at low speed
  • The mixer motor is effectively silenced and as it does not present a fire hazard it can be used continuously adjacent to the working area
  • Will mix 5% of polyester pigment into 200L of resin in 15-30mins at 20 degrees but will require longer mixing at lower temperatures.

Available on backorder

The airpowered Tank Mixer is a pneumatic double-propeller mixer for use on one-tonne tanks. It can be run at low speed to keep fillers in suspension or at high speed to mix pigments into laminating resins.

The drive unit is a quiet running 1.1h.p. pneumatic motor mounted on a universal adjustable frame and directly coupled through an outrigger bearing to a stainless steel shaft with two 4 blade aluminium propellers. The tank mixer is an essential aid to moulders using filled or pigmented resins in one tonne tanks.

*We recommend that pigment pastes are diluted with an equal amount of resin before being poured into the tank for mixing.

At a glance:

  • A pneumatic double propeller mixer for use on one-ton tasks
  • It can be run at low speed to keep filters in suspension or at high speed to mix pigments into laminating resins
  • The drive unit is a quiet running 1.1hp pneumatic motor mounted on a universal adjustable frame and directly coupled through an outrigger bearing to a stainless steel shaft with two 4 blade propellers
  • An essential aid to moulders using filled or pigmented resins.

Technical information:

Overall height: 123cm
Overall width: 33cm
Weight: 18kg
Shaft length: 106cm
Propeller diameter: 14.5cm
Max speed: 3000 (with load)
Air pressure: 90psi (6.2Bar)
Air consumption: 67scfm (1.9m/m3)

Reviews

There are no reviews yet.

Be the first to review “Air Powered Tank Mixer”
Scroll to Top