• For rotary drilling only - no hammer/percussion.
• The perfect drill bit for drilling ceramic tiles - doesn't walk or fail even in hardened floor tiles.
• Unique four-facet ground carbide tip for lower drilling pressure and perfect centring.

• Suitable for drilling difficult materials such as stainless steel, where greater heat is generated during drilling
• 135° split points
• 1.5mm to 7.0mm sizes in 0.5mm increments, plus 8, 9 and 10mm

• General prpose HSS drill bits suitable for a wide range of applications
• 118° point angle
• 1.5mm to 7.0mm sizes in 0.5,mm increments, plus 8, 9 and 10mm

• 10 each of  1.0mm - 8.0mm in 0.5mm increments
• 5 each of 8.5 - 10mm in 0.5mm increments
• High quality HSS drill bits

• 1.0mm to 10.0mm in 0.5mm increments
• Tough metal storage container
• Great value

• 8 piece
• 3.0 - 10mm in 1mm increments
• Tough plastic storage case

• 6 peices
• 12, 14, 16, 18, 20, 22 mm
• Comes conveniently packed in case

• 25 peices
• Range of sizes 1.0 - 13.0 mm in 0.5 mm steps

• Designed for high performance drilling in sheet metal
• Suitable for all types of wood & plastic
• Jet point

• Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications
• They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use
• Full range of sizes available

• First class HSS steel
• 1.0mm to 13.0mm in 0.5mm increments
• Other sizes available on request

• First class HSS steel
• 1/16" to 1/2" sizes stocked
• Other sizes available on request

• 1.0mm to 10.0mm in 0.5mm increments, plus 11.0mm & 12.0mm
• Other sizes available on request
• Standard HSS steel drills also stocked

• Suitable for hand and machine use
• Available in a range of popular sizes from 14mm to 22mm
• Other sizes availble on request

• The easy way to acheive the exact hole size required
• Available in three sizes: 4 - 20mm, 4 - 30mm and 6 - 38mm

• Ideal for drilling and enlarging holes of any diameter within the stated sizes
• Available in 3 sizes; 3 - 14mm, 5 - 20mm, 5 - 31mm
• Use of cutting fluid advisable

• Designed for the flush fitting of screws in a variety of materials: wood, plastic & non-ferrous metal
• Also can be used for general de-burring
• Available in 5 sizes

• Two sizes available
• Key supplied

• Great performance with high safety
• Hardened teeth will cut most materials used in mechanical workshops, shipbuilding and general maintenance (inc metal & plastic tanks)
• Variable tooth pitch around the blade from 4 - 6 tpi for faster cutting

• Hexagonal shank compatible with most powered drills
• Available in three sizes
• Complete with HSS pilot drill

• Available in two sizes to suit all mandrels

To be used with the Air Spotweld Drill. Tungsten carbide drill bit with three cutting edges and Multilayer-coating. Designed for boron steel with tensile strength from 450N/mm² - 1.580N/mm². The multilayer coating includes a special cutting oil and delivered all advantages of conventional TiN, TiAIN + Tic-coatings.

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

• 1. Taper or First tap
• 2. Second or Intermediate tap

For further information on this product click the 'View Details' button to the right.

• High performance metal drilling for portable drill users, works well on curved surfaces
• Revolutionary tip design stays sharper longer and drills up to 10x faster than other leading drill bits
• High speed steel features a black body and gold flute

• Fully ground HSS Cobalt drill bit manufactured to DIN 338. • 5% Cobalt helps to increase life of drill bit. • 135° Split point is self-centring for easier penetration. • Efficient clog-free swarf clearance. • Suitable for drilling high carbon steel and stainless steel

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials.

• Fully ground HSS Cobalt drill bit manufactured to DIN 338. • 5% Cobalt helps to increase life of drill bit. • 135° Split point is self-centring for easier penetration. • Efficient clog-free swarf clearance. • Suitable for drilling high carbon steel and stainless steel

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

• 6 peice set
• 6.3 - 20.5 mm size range

• Size range from 10-30 mm
• 152 mm long

• Range in sizes 20-50 mm

• 19 peices
• Range of sizes 1.0-10 mm in 0.5 mm steps

• 25 peices
• Range of sizes 1.0-13.0 mm in 0.5 mm steps

• 25 peices
• Range of sizes 1/16" - 1/2" in 1/64" steps

• Available in singles and bulk (25 peices)
• Range of sizes - P21-P23

• Easy to carry case
• 60 peices

• A4/316 Stainless Steel
• Easy to carry case
• 10 inserts

• A4/316 Stainless Steel
• Range of sizes available

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

For further information on this product click the 'View Details' button to the right.

• 6 peices
• 2 x 14 mm, 2 x 18 mm, 2x22 mm
• Comes conveniently packed in case

• Available in both standard and long lengths

• 900w
• Robust Case
• Variable Speed

For routing, inlaying and mortising in wood and other soft materials.

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces.

For further information on this product click the 'View Details' button to the right.