VAT

Login

3
3
Subtotal: £132.00 £110.00
Back to black - 500ml
1x £8.95 Excl. VAT
ALLOY WHEEL IMPACT SOCKET SET - 4pc 1/2"Sq Drive from DTC Tools
1x £52.83 Excl. VAT
Aeronix Technologies Resin Flow Mesh - 1200mm x 25m
1x £48.22 Excl. VAT
Subtotal: £110.00
3

Your shopping cart

3
Subtotal: £132.00 £110.00
Back to black - 500ml
1x £8.95 Excl. VAT
ALLOY WHEEL IMPACT SOCKET SET - 4pc 1/2"Sq Drive from DTC Tools
1x £52.83 Excl. VAT
Aeronix Technologies Resin Flow Mesh - 1200mm x 25m
1x £48.22 Excl. VAT
Subtotal: £110.00

Aeronix Technologies Carbon Neutral Release Film Low Temperature

From £170.55 Excl. VAT

  • 25 Micron (1.5m X 500m)
  • Obtained through hot needle perforation process and used in vacuum infusion process.
  • Good mechanical property and high tensile strength.
  • Material Type: MDPE polyethylene
  • Max working temp: 125ËšC
Options Unit Price Excl. VATIncl. VAT Bulk Pricing Excl. VATIncl. VAT Quantity
P31 Perforated
VCNRFN
£170.55 £204.66

3+: £152.42 £182.90

In stock
P31 Perforated
VCNRFP31
£209.33 £251.20

3+: £187.08 £224.50

In stock

Available in both nonperforated and perforated variants, release films are widely used in a number of composite manufacturing processes, the key function being to create a non-bonded layer that easily releases the layers above, whilst allowing a controlled resin flow into the laminate.

If choosing a perforated film, the pattern and materials you choose will depend on the process you are using and the density of the laminate, as this will dictate your desired resin flow rate. A perforated film will allow the escape of volatile gases from the workpiece but will also allow for the removal of any excess resin during both pre-preg and resin infusion processes.

Generally, release films are a thermoplastic film that has been blown or cast to between 10 and 75 microns in thickness and are usually coloured but translucent at those thicknesses.

As with bagging films, release films can be produced with varying levels of toughness and flexibility.

At a glance:

  •  25 Micron (1.5m X 500m)
  • Obtained through hot needle perforation process and used in vacuum infusion process.
  • Good mechanical property and high tensile strength.
  • Material Type: MDPE polyethylene
  • Max working temp: 125ËšC

X

1 new item has been added to your cart

Frequently bought with Aeronix Technologies Resin Flow Mesh - 1200mm x 25m


Sealey 203mm Sander 240V £149.00 Excl. VAT

Available on backorder

View more
Paint Spray Gun Cover - White £2.57 Excl. VAT

Availability: In stock (can be backordered)

View more
Ford No. 4 Plastic Viscosity Cup £19.82 Excl. VAT

Available on backorder

View more
Aerosol Primer Coloured - 500ml From £5.32 Excl. VAT
Clear
View more
BAXT MC5 Paint Mixing Cups From £13.28 Excl. VAT
Clear
View more
Carbon neutral release film
Aeronix Technologies Carbon Neutral Release Film Low Temperature From £170.55 Excl. VAT
Clear
View more
Farecla G-Mop Finishing Foam 3" (75mm) (5) £22.39 Excl. VAT

Availability: In stock (can be backordered)

View more
Scroll to Top