Air Powered Tank Mixer
From £2,249.00£2,698.80
SKU: 171174- Powerful and dependable, pneumatically-driven unit for use in vertical 200L drums of laminating resin.
- Variable speed airmoter that can be run at full speed or at low speed
- The mixer motor is effectively silenced and as it does not present a fire hazard it can be used continuously adjacent to the working area
- Will mix 5% of polyester pigment into 200L of resin in 15-30mins at 20 degrees but will require longer mixing at lower temperatures.
Availability: Available on back-order
£2,249.00£2,698.80
Excl. VAT
Updating...
- Key Information
The airpowered Tank Mixer is a pneumatic double-propeller mixer for use on one-tonne tanks. It can be run at low speed to keep fillers in suspension or at high speed to mix pigments into laminating resins.
The drive unit is a quiet running 1.1h.p. pneumatic motor mounted on a universal adjustable frame and directly coupled through an outrigger bearing to a stainless steel shaft with two 4 blade aluminium propellers. The tank mixer is an essential aid to moulders using filled or pigmented resins in one tonne tanks.
*We recommend that pigment pastes are diluted with an equal amount of resin before being poured into the tank for mixing.
At a glance:
- A pneumatic double propeller mixer for use on one-ton tasks
- It can be run at low speed to keep filters in suspension or at high speed to mix pigments into laminating resins
- The drive unit is a quiet running 1.1hp pneumatic motor mounted on a universal adjustable frame and directly coupled through an outrigger bearing to a stainless steel shaft with two 4 blade propellers
- An essential aid to moulders using filled or pigmented resins.
Technical information:
| Overall height: | 123cm |
| Overall width: | 33cm |
| Weight: | 18kg |
| Shaft length: | 106cm |
| Propeller diameter: | 14.5cm |
| Max speed: | 3000 (with load) |
| Air pressure: | 90psi (6.2Bar) |
| Air consumption: | 67scfm (1.9m/m3) |
